NORMAL PLAYBACK
21
PLA
YBACK
PREPARATION
•
Turn on the TV.
•
Tune the TV to the VCR output channel (CH 3 or 4).
•
If a direct VIDEO/AUDIO connection is made between the
VCR and the TV, set the TV’s source selector to VIDEO.
The
indicator will light and the VCR will power-up
automatically.
•
Make sure that the TIMER indicator in the VCR indicator panel
is not lighted. If it is, press
POWER
once.
•
If a tape without a safety tab is inserted, the VCR will start
playback automatically.
PLAY appears in the VCR indicator panel and TV screen.
•
It is not necessary to select the tape speed for playback. It will
be automatically selected by the VCR.
•
In playback, the
TV/VCR
selector switches to VCR mode
automatically.
STOP appears in the VCR indicator panel and on the TV screen.
•
If the tape reaches the end before
STOP
is pressed, the VCR
will automatically stop, rewind, eject, and it will turn itself off.
AUTO TRACKING
The automatic tracking function adjusts the picture to remove
snow or streaks.
The AUTO TRACKING function works in the following cases:
•
A tape is played back for the first time.
•
Tape speed (SP, LP, SLP) changes.
•
Streaks or snow appear because of scratches on the tape.
MANUAL TRACKING
If noise appears on the screen during playback, press either
CH/TRK (
D
D
/
E
E
)
on the remote control or
CH (
D
D
/
E
E
)
on the front
panel until the noise on the screen is reduced.
•
In case of vertical jitter, adjust these controls very carefully.
•
Tracking is automatically reset to normal when the tape is
ejected or the power cord is unplugged for more than 3
seconds.
TRACKING CONTROL
NORMAL PLAYBACK
1.
Insert a prerecorded video cassette.
2.
Press
PLAY
once.
3.
Press
STOP
to stop playback.
eject
power
menu
clear
sp / slp
tv / vcr
stop
rew
play
ff
cm skip
EZ review
pause
slow
rec / itr
ch/trk
adj
enter
ch/trk
adj
input
