17
VCR SETUP
CHANNEL SELECTION (Cont’d)
You don’t need to disconnect the VCR from the TV to watch TV
separately. When the VCR’s power is OFF, or when the VCR’s
power is ON and the
TV/VCR
selector is set to TV, the TV will
operate as if it were connected directly to the antenna or cable.
•
The power cord must be plugged into an AC outlet.
•
To view or record cable TV programs with the VCR, the VCR’s
TUNING BAND option must be set to CATV (TUNING menu).
•
Do not place the VCR directly on top of the TV. This may
cause interference in the picture and sound (of the VCR) dur-
ing the recording or playback mode. If this interference
occurs, move the VCR away from the TV.
NOTES
Turn on the TV and tune it to the
channel that you wish to watch.
Set
POWER
to OFF.
ADD/DELETE
AUTO CHANNEL SET
TUNING BAND:
TV
CH. ADD/DEL: CH. 2 ADD
SOURCE SELECT: TUNER
SELECT
TO EXIT PRESS
ADJUST
This feature allows you to add or erase channels from memory
manually.
Repeat steps 3 and 4 to add or erase channels.
TO ADD OR ERASE CHANNELS FROM MEMORY
VIEWING TV ONLY
CLOCK
PROGRAM
TUNING
SETUP
SELECT
TO EXIT PRESS
ENTER
MAIN MENU
TUNING MENU
1.
Press
MENU
and the MAIN menu will appear.
2.
Use
D
D
or
E
E
to select the TUNING menu option, then press
ENTER
. The TUNING menu will appear.
3.
Use
E
E
to choose the CH. ADD/DEL option. Use
F
F
or
G
G
to
select a channel to add or erase.
4.
Use
ENTER
to add or erase the channel.
5.
Press
MENU
to return to the TV screen.
