P A G E 1 1
206-3492-A
Hook Up S-Video VCR/DVD Player
TV Back
Video
In
S-Video
In
M.P.I.
Matrix
Out
R- Audio - L
In
S-Video
Out
Antenna
Cable
S-Video cables
not included
with TV
Audio Out
S-Video Out
3 4
VCR Back
VCR Back AV Panel
output
switch
R L
Your Zenith TV may be connected to a Super-VHS VCR or DVD player through the S-Video
Input located on the TV’s connection panel. Use the TV’s S-Video In jack to connect other
S-Video type equipment.
Hook up your S-Video type VCR to your
Zenith TV according to the diagram below.
Remove the back of the remote and put in
two AAA batteries.
Plug in your TV. Do not plug it into an
outlet controlled by an on/off switch. Your
Zenith TV is designed to operate on stan-
dard current, 120-volt 60 Hertz AC. Do not
attempt to operate it on DC power.
If you wish to “daisy chain” more than
one TV to receive the S-Video signal, make
the following connections with an S-Video
cable. Insert one end of the cable into S-
Video Out and the other end into the S-
Video In jack on your second Zenith TV, or
equivalent input for any other brand of TV.
See page 13.
1
2
3
4
4
back of
remote
