Zenith P42W24P, Installation And Operating Manual, Page: 8 / 36

8
External Equipment Viewing Setups
- If you have a mono VCR, connect the audio output cable from the VCR to the Monitor's AUDIO (L/MONO) input.
- If you connect an S-VIDEO VCR to the S-VIDEO input, the picture quality is improved; compared to connecting a regular
VCR to the Video input.
- Avoid having a fixed image remain on the screen for a long period of time. Typically a frozen still picture from a VCR.
If a 4:3 picture format is used; the fixed image may remain visible on the screen.
- To avoid picture noise (interference), leave an adequate distance between the VCR and Monitor.
How to connect
- Connect the VCR's Video output jack (yellow) to the BNC-RCA adapter provided then to the VIDEO INPUT on the Monitor
and VCR audio outputs to Audio jacks of AUDIO INPUT.
- When connecting the Monitor to external equipment, match the colors of connecting jacks (Video = yellow, Audio (L) = white,
Audio (R) = red).
How to use
1. Use the INPUT SELECT button on the remote control to select
VIDEO
.
(If connected to S-VIDEO, select the
S-VIDEO
external input source.)
2. Insert a video tape into the VCR and press the PLAY button on the VCR. (See VCR owner’s manual)
How to connect
- Connect the external equipment’s Video output jack (yellow) to the BNC-RCA adapter provided then to the VIDEO
INPUT on the Monitor and external equipment’s audio outputs to Audio jacks of AUDIO INPUT
- When connecting the monitor to an external source, match the colors of AUDIO/VIDEO input jacks on the monitor with
the output jacks on the audio/video equipment: Video = yellow, Audio (Left) = white, Audio (Right) = red.
How to use
1. Use the INPUT SELECT button on the remote control to select
VIDEO .
2. Operate the corresponding external equipment. See external equipment operating guide.
- After subscribing to a cable TV service from a local provider and installing a converter, you can watch cable TV program-
ming. This monitor cannot display TV programming unless a TV tuner device or cable TV converter box is connected to the
Monitor.
- For further information regarding cable TV service, contact your local cable TV service provider(s).
How to connect
- Connect the cable box’s Video output jack (yellow) to the BNC-RCA adapter provided then to the VIDEO INPUT on the
Monitor and cable box’s audio outputs to Audio jacks of AUDIO INPUT.
How to use
1. Use the INPUT SELECT button on the remote control and select
VIDEO .
2. Tune to cable service provided channels using the cable box.
• Component Input ports
To get better picture quality, connect a DVD
player to the component input ports as shown
below.
Component ports of the
Monitor
Y P
B
P
R
Video output ports
of DVD player
Y
Y
Y
Y Pb
B-Y
Cb
P
B
Pr
R-Y
Cr
P
R
How to connect
- Connect DVD video outputs to Y, P
B
, P
R
of COMPONENT (DVD/DTV
INPUT) and audio outputs to AUDIO INPUT jacks.
- If your DVD only has an S-Video output jack, connect DVD S-Video
out to S-Video input on the monitor and DVD audio outputs to AUDIO
INPUT jacks.
How to use
1. Turn on the DVD player, and insert a DVD.
2. Use INPUT SELECT button on the remote control to select
COMPO-
NENT . Refer to the DVD player's manual for operating instructions.
W W atching VCR Setup atching VCR Setup
W
W
atching External
atching External
A/V Source Setup
A/V Source Setup
W
W
atching Cable
atching Cable
TV Setup
TV Setup
W W atching DVD Setup atching DVD Setup