29
22. Green Adjustment (Command2:w)
G
To adjust Green in Color Temperature.
Transmission
Data Min: 0 ~ Max: 64
* Refer to ‘Real data mapping 2’. See page 28.
[k][w][ ][Set ID][ ][Data][Cr]
Acknowledgement
[w][ ][Set ID][ ][OK][Data][x]
23. Blue Adjustment (Command2:$)
G
To adjust Blue in Color Temperature.
Transmission
Data Min: 0 ~ Max 64
* Refer to ‘Real data mapping 2’. See page 28.
[k][$][ ][Set ID][ ][Data][Cr]
Acknowledgement
[$][ ][Set ID][ ][OK][Data][x]
26. Orbiter (Command2:p)
G
To turn the Orbiter function on/off.
You can also turn Orbiter on/off in Special menu.
Transmission
Data 0: Orbiter off
1: Orbiter on
[j][p][ ][Set ID][ ][Data][Cr]
Acknowledgement
[p][ ][Set ID][ ][OK][Data][x]
25. Abnormal State (Command2:z)
G
To recognize an abnormal state.
Transmission
Data 0: Normal (Power on and signal)
1: No signal (Power on)
2: Turn the monitor off by remote control
3: Turn the monitor off by sleep time function
4: Turn the monitor off by RS-232C function
5: 5V down
6: AC down
* This function is “read only”.
[k][z][ ][Set ID][ ][FF][Cr]
Acknowledgement
[z][ ][Set ID][ ][OK][Data][x]
27. White Wash (Command2:q)
G
To turn the White Wash function on/off.
You can also turn White Wash on/off in Special menu.
Transmission
Data 0: White Wash off
1: White Wash on
[j][q][ ][Set ID][ ][Data][Cr]
Acknowledgement
[q][ ][Set ID][ ][OK][Data][x]
24. PIP Input Select (Command2:y)
G
To select input source for sub picture in PIP/Twin pic-
ture modes. You can also select input source for sub
picture using PIP INPUT button on remote control.
Transmission
Data 0: RGB1 (DTV)
1: COMPONENT
2: VIDEO
3: S-VIDEO
[k][y][ ][Set ID][ ][Data][Cr]
Acknowledgement
[y][ ][Set ID][ ][OK][Data][x]
Summary of Contents for P42W24P
Page 35: ...35 Notes...