background image

3

INTRODUCTION

IMPORTANT SAFETY INSTRUCTIONS

PORTABLE CART WARNING

206-03777

1. Read Instructions
All the safety and operating instructions should

be read before the product is operated.
2. Follow Instructions
All operating and use instructions should be

followed.
3. Retain Instructions
The safety and operating instructions should

be retained for future reference.
4. Heed Warnings
All warnings on the product and in the operating

instructions should be adhered to.
5. Cleaning
Unplug this product from the wall outlet before

cleaning. Do not use liquid cleaners or aerosol

cleaners. Use a damp cloth for cleaning.
6. Water and Moisture
Do not use this product near water - for example,

near a bath tub, wash bowl, kitchen sink, or

laundry tub, in a wet basement, or near a

swimming pool.
7. Accessories, Carts, and Stands
Do not place this product on an unstable cart,

stand, tripod, bracket, or table. The product may

fall, causing serious injury to a child or adult,

and serious damage to the product. Use only

with a cart, stand, tripod, bracket, or table rec-

ommended by the manufacturer, or sold with

the product. Any mounting of the product

should follow the manufacturer’s instructions,

and should use a mounting accessory recom-

mended by the manufacturer.
8. Transporting Product
A product and cart combination should be

moved with care. Quick stops, excessive force,

and uneven surfaces may cause the product

and cart combination to overturn.

9. Attachments
Do not use attachments not recommended by

the product manufacturer as they may cause

hazards.
10. Ventilation
Slots and openings in the cabinet are provided

for ventilation and to ensure reliable operation

of the product and to protect it from overheating,

and these openings must not be blocked or

covered.  The openings should never be

blocked by placing the product on a bed, sofa,

rug, or other similar surface. This product

should not be placed in a built-in installation

such as a bookcase or rack unless proper

ventilation is provided or the manufacturer’s

instructions have been adhered to.
11. Power Sources
This product should be operated only from the

type of power source indicated on the marking

label. If you are not sure of the type of power

supply to your home, consult your product

dealer or local power company. For products

intended to operate from battery power, or

other sources, refer to the operating instructions.
12. Power-Cord Polarization
This product is equipped with a three-wire

grounding type alternating-current line plug (a

plug having one blade wider than the other).

This plug will fit into the power outlet only one

way. This is a safety feature. If you are unable

to insert the plug fully into the outlet, contact

your electrician to replace your obsolete outlet.

Do not defeat the safety purpose of the polarized

plug.
13. Power-Cord Protection
Power-supply cords should be routed so that

they are not likely to be walked on or pinched

by items placed upon or against them, paying

particular attention to cords at plugs, conve-

nience receptacles, and the point where they

exit from the product.

Important safeguards for you and your new product
Your product has been manufactured and tested with your safety in mind. However, improper
use can result in potential electrical shock or fire hazards. To avoid defeating the safeguards that
have been built into your new product, please read and observe the following safety points when
installing and using your new product, and save them for future reference.
Observing the simple precautions discussed in this booklet can help you get many years of
enjoyment and safe operation that are built into your new product.
This product complies with all applicable U.S. Federal safety requirements, and those of the
Canadian Standards Association.

(Continued on next page)

Summary of Contents for L15V26





























































Reviews: