Zenith L15V26, Operating Manual

Page: 13 / 60

206-03777
Antenna Connections
13
CONNECTIONS
DC 12V ANT IN
+
75
Ω
N
AUDIO
L R
DC 12V
ANT IN
+
75
Ω
N
AUDIO
L R
* For better picture quality, adjust antenna direction.
●
Typical wall antenna jack used in apartment buildings, connect the antenna cable as shown below.
(Use the correct type of antenna cable for the type of wall antenna jack.)
Wall Connection Jack Apartment Buildings
Antenna Jack
Bronze Wire
Turn clockwise to
tighten.
Antenna
Converter
300
Ω
Flat Wire
75
Ω
Round Cable
● This type of antenna is commonly used in single family homes.
UHF
Antenna
VHF Antenna
Antenna Jack
Bronze Wire
Turn clockwise to
tighten.
Antenna
Converter
300
Ω
Flat Wire
75
Ω
Round Cable
* If you have a 75
Ω
round cable, insert the bronze wire and then tighten the connection
nut. And if you have a 300
Ω
flat wire, connect the twisted wire to the antenna converter
and then connect the converter to the antenna jack.
* When using 75
Ω
round cable, do not bend the bronze wire. It may cause poor picture
quality.
* In poor signal areas, you can get bet-
ter picture quality if you install the
antenna as shown at right.
* If antenna is split for two TVs, use
“signal divider” for connection.
Signal
Amplifier
UHF VHF
Single Family Home
Connecting to wall antenna socket
Connecting to wall antenna socket
Connecting to outdoor antenna
Connecting to outdoor antenna
DC 12V
ANT IN
+
75
Ω
AUDIO
L R