Zenith IQB56W10G, Operating Manual

Page: 30 / 72

Screen Source
P A G E 3 0
206-3583
Press the MENU button on the remote
control so that the Setup menu appears,
then press ENTER.
Use the UP/DOWN arrows to select
Screen Source.
Press ENTER to access the Screen Source
screen.
Use the UP/DOWN arrows to choose the
source for your main screen.
To select the source for the PIP screen,
first select DTV- ANT for the source of
the Main screen, then press ENTER to
access the menu for the PIP sources.
Use the UP/DOWN arrows to select the
source for the PIP screen.
Press QUIT to save and return to TV
viewing or press ENTER to save and
return to the Setup Menu.
1
2
3
4
5
1 2 3
4 5 6
7 8 9
0
record
pause chapter chapter
play
stop
rewind
fast fwd
menu
enter
quit ratio
surf
flashbk
picture
power mute
info clear vcr + guide
video dvd
vcr
cable
audio
aux
tv sat
vol
ch
pg up
pg dwn
antenna dbs
2/4/6
1/3/5/7
6
7
1
Choose the sources for your main picture and PIP.
This menu is where you switch input source devices so you can watch your
antenna, cable TV, VCR, DVD, or anything else that you have hooked up to your
Entertainment Machine. Digital television signals will come through DTV-ANT.
Analog antenna or cable will come through either Antenna/Cable 1 or
Antenna/Cable 2, depending on how you set up your system. All other devices
will correspond to the names of the jacks that they’re connected to.
7