Zenith GlobalPlus 800955NZ, Installation Instructions Manual

Page: 7 / 12

Page 7
Performance Data Part Number 91289NZ
Performance Data Sheet
Use Replacement Catridge 91289NZ
The concentration of the indicated substances in water entering the system was reduced to a concentration less than or equal to the
permissible limit for water leaving the system as specified in NSF/ANSI Standard 42 and NSF/ANSI Standard 53.
System tested and certifed by NSF
International against NSF/ANSI Standard
42 and Standard 53 for the reduction of
substances as listed below according to
Standard 42 and Standard 53.
Substance
Reduction
Average
Infl uent
NSF/ANSI specifi ed
Challenge Concentration
Avg %
Reduction
Average
Product
Water
Concentration
NSF Max
Permissible
Product Water
Concentration
Australian/ New Zealand
(AS/NZS Standard 3497)
Max Permissible Prod-
uct Water Concentration
NSF
Reduction
Require-
ments
NSF Test
Report
Chlorine Taste
and Odor
2.0 mg/L 2.0 mg/L ±10% 97.3% 0.05 mg/L N/A 5.0 mg/L
≥
50% J-00109688
Cyst* 140,000
cysts/L
Minimum 50,000 cysts/L >99.99% 3 cyst/L N/A 1 cyst/100 L
≥
99.95% J-00109693
Lead pH @6.5 0.150
mg/L
0.15 mg/L ± 10% 99.3% 0.001 mg/L 0.010 mg/L 0.01 mg/L N/A J-00109691
Lead pH @8.5 0.150
mg/L
0.15 mg/L ± 10% 99.3% 0.001 mg/L 0.010 mg/L 0.01 mg/L N/A J-00109692
Capacity: 3,785 litres Contaminant Reduction Determined by NSF testing.
Test Conditions: pH7.5, Pressure: 415 kPa, Flow Rate: 1.9L/min
* Based on the use of Cryptosporidium parvum oocysts
Application Guidelines/ Water Supply Parameters
Service Flow 1.9 Ipm
Water Supply Potable Water
Water Pressure 172 - 862 kPa
Water Temperature 4.4ºC - 38ºC
It is essential that the manufacture’s recommended installation, maintenance and filter replacement requirements be carried out for the
product to perform as advertised. See installation Manual for details.
Note: While the testing was performed under standard laboratory conditions, actual performance may vary.