Zenith FFH-DV25A, Installation And Operating Manual

Page: 19 / 52

RADIO OPERATION PAGE 19
Listening to the radio
Press the TUNER/BAND until AM or FM
appears in the display window.
The last received station is tuned in.
Press the PRESET
(-/+)
repeatedly to
select the preset station you want.
Each time you press the button, the unit tunes in
one preset station at a time.
Adjust the volume by rotating VOLUME
on the front panel or pressing VOLUME
(+/-) repeatedly on the Remote control.
To turn off the radio
Press the POWER to turn the unit off or select another
function mode (CD/DVD, TAPE or AUX).
To listen to non-preset radio stations
• Use manual or automatic tuning in step 2.
• For manual tuning, press the TUNING (+/-) on the
front panel repeatedly.
• For automatic tuning, press and hold the TUNING
(+/-) for about two seconds on the front panel.
1
2
3
Preset radio stations in the unit’s memory first (see
“Presetting radio stations” on the previous page).
❍
Use MODE/RIF (Radio Interference Filter) to switch the
mono reception if stereo reception is distorted by noise.
❍
When recording the MW(AM) or LW broadcast, beat noises
occur. If it does, press the MODE/RIF once.
Notes
For your reference
• If an FM program is noisy
Press the MODE/RIF on the front panel so that
“STEREO” disappears in the display window. There
will be no stereo effect, but the reception will
improve. Press the MODE/RIF again to restore the
stereo effect.
• To improve reception
Reposition the supplied antennas.
MODE/
RIF
TUNER/
BAND
PRESET
(-/+)
VOLUME