Presetting the radio stations
12
11
Press POWER to turn on the unit.
2
2
Press TUNER or TUNER/BAND until the FM or
AM appears in the display window.
3
3
And then every time you press TUNER or
TUNER/BAND, FM and AM changes alternately.
4
4
Press TUNING DOWN/UP on the front panel until
the frequency indication starts to change, then
release.
Scanning stops when the unit tunes in a
station.
5
5
Press MEMO on the front panel.
A preset number will flash in the display window.
6
6
Press PRESET DOWN/UP (or PRESET (
)
on the remote control) to select the preset
number you want.
77
Press MEMO on the front panel again.
-
The station is stored.
8
8
Repeat steps 3 to 6 to store other stations.
To tune in a station with a weak signal
Turn
MULTI JOG SHUTTLE
in step 3 to tune in the
station manually.
To clear all the memorized stations
Press and hold
MEMO
on the front panel for about two
seconds, “CLEAR” appears in the display window and
then press
CLEAR
again, the stations are cleared.
For your reference
If all stations have already been entered, FULL message
will appear in the display window for a moment and then
a preset number will flash. To change the preset number,
follow the steps 6-7 on the left side.
To recall presets
Press and hold
PRESET DOWN/UP
( or
PRESET
(
)
on the remote control) until the desired preset
number appears or press it repeatedly.
Tuning in automatically
Press
TUNING DOWN/UP
.
Tuning in manually
Turn
MULTI JOG SHUTTLE.
You can preset 30 stations for FM and AM. Before tuning, make sure that you have turned down the volume to the
minimum.
TAPE-A
TAPE-B
TAPE-A
TAPE-B
X
TAPE-A
APE-A
TAPE-B
APE-B
TUNER
MULTI JOG
SHUTTLE
•
TUNING DOWN/UP
•
PRESET DOWN/UP
•
STOP (
)/ CLEAR
TUNER/
BAND
PRESET (
)
MEMO
POWER
