background image

Timer Function

10

11

Press CLOCK to check the current time.

2

2

Press “TIMER” to enter the timer setting
mode.

(If you want to correct the previous 

memorized TIMER setting, press and hold the

TIMER

” button more than 2 seconds.)

The previous memorized timer on time and
“TIMER” appears in the display. Each function :
TUNER-CD-TAPE flashes in the display 
window in turn.

3

3

Press SET when the desired function is

flashing.

4

4

If you select the TUNER:
PLAY and REC  flash in the display window
alternately for about 3 seconds. Press 

SET

to

confirm the desired operating mode.

REC: TUNER recording and play
PLAY: TUNER play only
• If you have selected the CD or TAPE,

ignore step 4.

5

5

When you have selected the TUNER;
Select the previous memorized preset number
with 

MULTI JOG SHUTTLE 

and press 

SET

.

The hour “ON” display flashes.

• If you have selected the CD or TAPE, ignore

step 5.

6

6

Set the hour to switch on by turning MULTI

JOG SHUTTLE.

77

Press SET to confirm the hour to switch on.

The minute ‘ON’ display flashes.

8

8

Set the minute to switch on by turning MULTI

JOG SHUTTLE.

9

9

Press SET to confirm the minute to switch
on.

The hour ‘OFF’ now flashes in the display.

110

0

Set the hour to switch off turning MULTI
JOG SHUTTLE.

1111

Press SET.

112

2

Set the minute to switch off turning MULTI
JOG SHUTTLE.

113

3

Press SET.

114

4

Adjust the volume level turning MULTI JOG
SHUTTLE.

115

5

Press SET.

“TIMER” appears in the display window and
the timer setting has been completed.

116

6

Switch the system off.

The selected function is automatically
switched on and off at the time set.

To cancel or check the timer

Each time the 

“TIMER”

button is pressed you can

select the timer set or cancel. You can also check the
timer setting status.
To activate or check the timer, press the  

“TIMER”

button so that “

TIMER

” appears in the display window.

To cancel the TIMER, press the 

“TIMER”

button so

that “

TIMER

” disappears in the display window.

With the TIMER function you can have the radio reception and recording, CD play, tape play or auxiliary source play
and recording turned on and off at the time desired.

Summary of Contents for FFH-986A





















Reviews: