11
BEFORE OPERA
TION
Audio Adjustment
Volume Adjustment
• Turn
VOLUME DOWN/UP knob
clockwise to increase
the sound level, or counterclockwise to decrease it.
• Press
VOLUME CONTROL (
)
to increase the
sound level, or press the
VOLUME CONTROL (
)
to
decrease it on the remote control.
Sound Quality Adjustment
• To activate stereo sound
- You can choose between 8 fixed sound impressions
and 1 USER MODE.
Select a desired sound mode by using the
EQ PATT.
buton ( or turning EQ knob on the front panel).
- When you select USER MODE, press the ENTER
button repeatedly.
You can select Three of sound mode (BASS,
MIDDLE, TREBLE).
- Each you press the button the indication changes as
follows.
FLAT
→
ROCK
→
POP
→
VOCAL
→
CLASSIC
↑
USER MODE
←
SAMBA
←
SALSA
←
JAZZ
• Headphone Jack
Connect a stereo headphone plug ( 6.3mm) into the
headphone jack.
The speakers are automatically disconnected when
you plug in the headphones (not supplied).
MUTE
Press
MUTE
to mute your unit.
You can mute your unit in order, for example, to answer
the telephone, “MUTE” indicator flashes in the display
window.
SURROUND
To activate surround mode
• You can choose between 6 fixed sound impressions.
• Select a desired surround mode by using the
SURROUND
button.
• Each you press the button the indication changes
as follows.
SURROUND OFF
→
SIMULATED LOW
→
SIMULATED HIGH
↑
MOVIE HIGH
←
MOVIE LOW
←
MUSIC HIGH
←
MUSIC LOW
DISPLAY MODE
Whenever you press
DISPLAY MODE
, you can enjoy
the spectrum change with 6 types in the display.
XDSS (Extreme Dynamic Sound System)
- Press
XDSS
to reinforce treble, bass and surround
effect.
- Each you press the button the indication changes as
follows.
XDSS OFF
→
XDSS1 ON
→
XDSS2 ON
DEMO
Press
DEMO
in power off state to demonstrate the
function in the display.
To cancel it, press
POWER
or
DEMO
again. During
demonstration in power-on status you can cancel it
by using the other buttons.
DIMMER
This function is darken the display window by half in
power-on status. Press
DIMMER
once, and the display
is darken, and if you press it once more, the display will
darken by half too. To cancel it press the button again.
11
Connect an auxiliary device i.e. TV or VCR, via the rear mounted AUX phone jacks.
2
2
Press
AUX
.
Auxiliary Function
Notes
You can also record from the auxiliary input source,
see Recording Section.
