11
806143NZ v1.06 07.19 CW ChillTap UCCT
Troubleshooting
Prior to any fault finding, please ensure all water connections to the command centre are sound and that
the incoming water supply is turned on. Also ensure that all electrical connections are secure and that the
command centre has had adequate time to cool down.
Call a licenced electrician, plumber, or Zenith free call in New Zealand on 0800 558 055, for assistance, service,
spare parts, or enquiries.
Symptom
Possible Cause
Solution
No water supplied
Mains water not connected or turned
on
Connect or turn on water supply.
Water pressure regulator failed
Contact local Zenith Service Provider.
Unit frozen up
Contact local Zenith Service Provider.
Internal water leak
Contact local Zenith Service Provider.
Water not chilled
No power
Restore power to the unit.
Thermostat faulty or out of
calibration.
Contact local Zenith Service Provider.
Insufficient cooling air flow through
the refrigeration system
Check and clean air inlet screen.
Refrigeration failure
Contact local Zenith Service Provider.
Rated chilled water capacity has been
exceeded
Allow unit sufficient time to recover.
Do not use strong, corrosive or abrasive cleaning materials. Stainless steel
surfaces will show scratches if an abrasive cleaning product is used.
Wipe clean the outer surfaces with a sponge or a soft cloth using a mild soap
and water.
Cleaning
In order to help preserve our environment we ask that you dispose of this product correctly. Please contact
your local city council for collection centre details.
End of life disposal
