Zenith C27F33, Installation And Operating Manual, Warranty

Page: 17 / 32

Stereo/SAP Broadcasts Setup
This TV can receive MTS stereo programs and any SAP (Secondary
Audio Program) that accompanies the stereo program, as the system
to be transmitted one additional sound signal as well as the original
one. MTS function doesn't operate in the video mode.
Using the mts Button
1. Use the mts button to select your desired MTS mode.
Each time you press this button, the MONO , STEREO , or SAP
mode appear in turn.
2. Press the enter (
A
) button.
Notes
• Stereo or SAP can only be received when the TV station transmits
those signals, even though you have selected STEREO or SAP .
• Mono sound is automatically received if the broadcast is only in
Mono; even though STEREO or SAP has been selected.
• Select MONO if you want to listen to mono sound in remote fringe
areas during stereo/SAP broadcasting.
Auto Sound Control
You can enjoy the best sound without any special adjustment because
the TV set automatically adjusts the sound appropriate to viewing
program character.
Using the dasp Button
1. Press the dasp button.
2. Use the dasp button to select
Dolby virtual , Flat , Movie , Music ,
Sports or User .
3. Press the enter (
A
) button to remove menu.
Using the Audio Menu
1. Press the menu button and then use D / E button to select the
menu shown to the right.
2. Press the
G
and then use the D
/
E button to select DASP .
3. Use the F / G button to select Dolby virtual , Flat , Movie , Music ,
Sports or User .
4. Press the menu button to remove menu.
Sound Control
17
Equalizer
Balance
0
AVL Off
DASP Flat
DBS Off
++ MOVE + {NEXT + MENU
:
EXIT
+ DASP + + +++ Flat