Zenith C27F33, Installation And Operating Manual, Warranty

Page: 8 / 32

Before operating your TV, make sure the following have been completed.
• Your TV is connected to an antenna or a cable system.
• Your TV is plugged into a standard power outlet.
Basic TV Setup and Operation
Turning the TV On/Off
The set switches to standby mode and the standby indicator lights up
in red.
To turn the TV on from standby mode, press the TV/VIDEO, CH
D /
E
button on the set or POWER, TV/VIDEO, CH D /
E
or number
button on the remote control.
A channel number will be displayed on the screen. The on-screen
display will disappear after a few seconds.
Press the power button on the remote control, the TV reverts to
standby mode.
Selecting the Menu Language
1. Press the menu button and then use D /
E
button to select the
menu shown to the right.
2. Press the G and then use D /
E
button to select Language .
3. Use the
F
/
G
button to select the desired language.
From this point on, the menus will appear in the language you
selected.
4. Press the menu button to remove menu.
8
Language English
Key + lock Off
Degauss Off
Caption Off
Tilt 0
Parental + ctl
++ MOVE + {NEXT + MENU
:
EXIT