P A G E 3 1
Programming the Remote
The device you want to program
should be ON.
On the chart in this manual, find the
type of device you’re programming and
then find the brand name. Make a
note of the three-digit code—you’ll
need it soon.
Press and hold the PRG key. It’s
recessed so it doesn’t get pushed
accidentally. When indicator light
behind the PRG button turns on, you
can release the button.
Push the button with the name of the
device you’re programming (VCR,
CABLE, TV).
Using the number pad, enter the
three digit code found on the chart in
the Reference section.
Press ENTER to save the code The
indicator light will flash three times
and turn off if the code was
accepted.
Aim the remote at the device and
push the POWER button. It should
turn off. If not, try the other codes
listed and continue from step three.
Note: After programming, to operate
the device you have just programmed,
press the proper Mode button first.
Programming your Zenith remote
will allow you to use one remote
to work up to 7 different devices!
Not all devices will work with your
Zenith remote control.
1
2
3
4
5
6
7
PRG
POWER
CABLE
VCR
AUX
TV
ENTER
FLASHBK
MUTE
CHANNEL
CHANNEL
VOLUME
VOLUME
1
2
3
4
5
6
7
0
8
9
MENU
REWIND
FFWD
RECORD
QUIT
A
B
C
CC
TV/VCR
SOURCE
PAUSE
TIMER
PLAY
STOP
SURF
3
Indicator Light
6
4
5
Program your remote to work with a vast range of A/ V devices.
7
206-3588
