Page 12 of 24
804545NZ - BW_AB Small_09.18 v1.02
3.1 Settings - Date/Time
From the settings menu choose
Settings
and select
Navigating using
and
Perform a selection or confirm an adjusted value using
Adjust the date/time values using
and
Note: Time can be in 12hr or 24hr mode.
To set up time choose a selection, then
Adjust value by using
and
then
to confirm.
Follow similar steps to set up date.
From the settings menu choose
Settings
and
select
and
to adjust boiling point.
Confirm using
and return to the previous menu.
3.2 Settings - Temperature
Note: Setting the temperature above 98°C may require
boiling calibration to prevent excessive steam release
or high energy usage (see section 4.2).
3.3 Settings - Sleep Modes
From the settings menu choose
Sleep Modes
and select
Choose
Sleep Trigger
and select
,
and
to select the trigger for the unit to enter its sleep mode.
Confirm using
and return to the previous menu.
Disabled
the unit will not enter its sleep mode.
the unit will use the on/off timer set-
tings to enter and exit its sleep mode.
the unit will enter its sleep mode when
darkness is detected and will exit its
sleep mode when the ambient light
returns to a normal level (bright room).
Timer
Ambient Light
Choose
Sleep Action
and select
and
to select the heating mode action when the unit is in its
sleep mode. Confirm using
and return to the previous
menu.
3.3.2 Sleep Action
3.3.1 Sleep Trigger
Menu Operation
