STOL
CH750
Zenith Aircraft Company
www.zenithair.com
Rear Fuselage Top Skin & Rear Fuselage
Assembly
Section 75-FA-2Page 5 of 9
Revision 2.0 (8/13/2010)
© 2010 Zenith Aircraft Co.
Cut two L angles to fit between the Side Skins at the top of the H.T. Frames. Clamp the L angles to the
Longerons and the H.T. Frames. With a #40 drill bit, back drill through the H.T. Frames into the L angle and
Cleco. With a #20 drill bit, expand the holes in the H.T. Frame and L angles and Cleco.
Cleco the Uprights and Side Channels to the Side Skins.
Note:
The photo above has the Top Skin installed; this is done in a following step.
P/N:
75F3-4
Upright
P/N:
75F4-1
Side Channel
