A100K10602
AlphaCom
User
Guide
11
10
AlphaCom User Guide
A100K10602
3.4
Calling To and From Noisy Environments
If there is disturbing background noise:
●
Press M and hold while you speak.
●
Release M while you listen.
You are now in simplex mode.
The volume will increase at the listening end.
To go back to automatic direction switching:
●
Tap M briefly.
Either party can use the M function.
3.5
Adjusting the Sound / Volume Level
For the IP Desk Master, the volume control is located on
the LED indicator. For the CRM-V and IP/Analog Flush
Master stations, the volume control is located on a
separate button.
●
Press the volume control button at the plus or minus
end to adjust the volume up or down.
For the Analog Desk Master stations, the volume control
is located on a slide switch.
●
Slide the switch to the left or right to adjust the
volume up or down to the level desired.
For the Dual Display station, the volume control is located
on a control knob.
●
Turn the volume control knob to adjust the volume
up or down to the level desired.
3.6
Muting the Microphone
To mute the microphone:
●
Press 0 and hold during the conversation.
To un-mute the microphone:
●
Release 0.
-
+
P
3.7
If Someone is Not at his Station
Sometimes, the person you’re calling may not be present
at his/her station.
In this situation, you have several options:
●
Cancel and make a Group Call (or All Call)
●
Activate the pre-programmed search list
●
Leave a Call Back message
●
Leave a predefined voice/text message
●
Cancel and use the re-dial feature later
●
Activate the person’s pocket pager
3.8
Waiting for a Busy Station to Become Free
If a station or a feature that you call is busy, you will hear
a busy tone and your display will show
Busy
.
You can either:
●
Press C to disconnect and try again later.
or
●
Wait for up to 30 seconds.
If the station or feature becomes free within 30 seconds,
you will be connected automatically.
For information on the Busy Notify and Busy Override fea-
tures, see the PRIORITIES section.
3.9
Re-Dialing
You can program one of the single-touch DAKs on your
station to re-dial the last intercom number dialed from the
station.
For information on how to program DAKs, see the
PROGRAMMING DIRECT ACCESS KEYS section.
The default directory number for the re-dial feature is
9532.
For more information on re-dialing, see the RE-DIALING
section.
Page 11:
Page 12:
Page 16:
Page 16:
Page 20:
Page 28:
P