Zenitel Vingtor Stentofon AlphaCom, User Manual, Page: 12 / 21

A100K10602 AlphaCom User Guide 23 22 AlphaCom User Guide A100K10602
11 Call Request
To make a Call Request:
●
Dial 623 + the station number
You will hear a voice message:
“Your call is registered. Please wait.”
The message is spoken in English, German and French.
The display will show:
Call registered
The LED indicator will flash and the station will beep until
the call is answered.
To answer a Call Request at the called station:
●
Dial 70
The display shows the number and name for the first Call
Request sender.
●
Press 8 to call the sender and delete the Call
Request from the list.
There is a notification tone for each Call Request and the
LED indicator will start to flash.
The display shows the number of messages at your sta-
tion waiting to be answered.
You also have the following options:
0 : delete message without answering
1 : repeat message
7 : go to previous message
9 : go to next message
C : disconnect without deleting messages
For handling call requests on stations with displays, the
following codes, that are normally programmed in DAKs,
are used:
●
7638 (Answer)
●
7637 (Up)
●
7639 (Down)
●
7630 (Delete)
The Call Request feature is usually used for dialing from a
substation to a defined master station. The Call Request
number is programmed on one of the buttons on the
substation.
Your call is registered,
please wait.
+
Your call is registered,
please wait.
12 Radio / Music Programs
This feature requires additional audio sources. The radio
channels, music or internal programs available will de-
pend on your installation.
12.1 Selecting a Program
To select an audio program:
●
Dial the Program Number
Program 1 - 6 dial 801- 806
Program 7 - 38 dial 8101 - 8132
Frequently used programs can be programmed to a DAK.
The program is, by default, temporarily interrupted by
outgoing and incoming calls, but it remains on during
Group Calls and All Calls.
12.2 Turning Off or Toggling a Program
To turn off an audio program:
●
Press C
or
●
Dial 800
To toggle on/off a program that has already been
selected:
●
Dial 792
12.3 Scrolling Through Available Programs
To scroll through the available programs:
●
Dial 790 for the next program.
●
Dial 791 for the previous program.
The numbers above for program scrolling may be
programmed to a DAK. Program off (800) is included in
the program list.