Zenitel Vingtor Stentofon AlphaCom, User Manual, Page: 5 / 21

A100K10602 AlphaCom User Guide 9 8 AlphaCom User Guide A100K10602
3 Making Intercom Calls
3.1 Starting and Ending a Handsfree Call
To call another station:
●
Dial the number of the station
or, if the number has been pre-programmed:
●
Press the Direct Access Key (DAK)
The LED indicator lights up on both stations when the call
is connected and you will hear a short tone.
To terminate the conversation:
●
Press C
The LED indicator light goes out.
3.2 Using the Handset to Call
To call another station:
1. Lift the handset
– You will hear a dial tone.
2. Dial the number of the station.
To terminate the conversation:
●
Replace the handset or press C
3.3 Setting to Private Mode
In Private mode, calls do not come through directly but
are indicated by a ringing tone at both stations.
The privacy switch is different depending on whether it is
an IP, Analog or Dual Display station.
To set the station to Private mode for IP Master stations:
●
Press C and hold for 2 seconds.
– PRIVATE will be displayed briefly and the P symbol will
appear and start to flash.
17/03-2009 10:45
1001 Subscriber Name
Menu Name
PRIVATE
To set the station to Private mode for Analog Master
stations:
●
Slide the privacy switch to the left across to
PRIVATE.
To set the station to Private mode for the Dual Display
station:
●
Press the P button
– A “muted loudspeaker” icon will be displayed.
To answer a call while in Private mode:
●
Press M
or
●
Lift the handset
– for stations with handsets
or
●
Slide the privacy switch across to the right from
PRIVATE to OPEN.
– for Analog Master stations
within 30 seconds. After 30 seconds, the call attempt is
automatically canceled.
)
Your system may be set so that some calls are
always in OPEN or PRIVATE mode regardless of
switch setting. Incoming telephone calls are normally
indicated by a private ringing tone.
To set the station back to open mode:
●
Press C and hold for 2 seconds.
– for IP Master stations (the P symbol will disappear)
or
●
Slide the privacy switch to the right across to OPEN.
– for Analog Master stations
or
●
Press the P button
– for the Dual Display station
P
100002 Called name
100001 Own Name
9 Search
/
P
100002 Called name
100001 Own Name
9 Search
/