14
A100K11211
SIP Master Stations Configuration
Allowed Network
- This is used, together with the network mask, to determine the
allowed network for reading the MIB on the station.
- The IP address is entered in regular dot notation, e.g. 10.5.2.100.
For example with an allowed network 10.5.2.0 and a network
mask of 24, any station with an IP address in the range 10.5.2.0 to
10.5.2.255 can access the MIB.
SNMP Trap Settings
Trap receiver
- Enter the IP address of the server receiving SNMP traps. This is
disabled if the field is left empty.
Enable SNMP Traps
IP-Station Started
- If enabled, the station will send an SNMP trap when the station
application is started.
Registration Successfull
- If enabled, the station will send an SNMP trap when successfully
registered in the SIP domain.
Registration Failed
- If enabled, the station will send an SNMP trap if registration in the
SIP domain failed.
Call Connected
- If enabled, the station will send an SNMP trap when a call is
connected.
Call Connect Failed
- If enabled, the station will send an SNMP trap if a call to the station
fails to connect for any reason (busy etc.).
Call Disconnect
- If enabled, the station will send an SNMP trap when a call is
disconnected.
Button Hanging
- If enabled, the station will send an SNMP trap when a button is
hanging.
Sound Test Failed
- If enabled, the station will send an SNMP trap when a sound test
has failed.
Sound Test Error
- If enabled, the station will send an SNMP trap when there is a
sound test error.
