6
A100K11211
SIP Master Stations Configuration
2
SIP Configuration
There are two ways of configuring the IP Master Station for SIP:
● Using the station keypad
● Using a web browser
2.1
Configuration Via Station Keypad
When the IP Master Station is not registered with the SIP server, an
offline menu is displayed. The offline menu can be used to configure the
station and is navigated with the 4 buttons below the display. The button
on the left is used as a
Select
or
Ok
button as shown in the display, while
the button on the right is used as a
Back
button. The two buttons in the
middle are used to navigate up or down according to the arrows. When
configuring IP settings, the
M
key is used to insert a “
.
” (dot) and the
right-middle button
is used to delete a character.
To enter the setup menu:
1. Press the
Setup
button on the left
2. Enter the password
1851
3. Press the
Ok
button
Station mode
If
SIP settings
is not listed as a main menu option, select
Station mode
to set the station to
SIP
mode.
Main menu
Use the two arrow buttons in the middle to navigate to
SIP settings
and
press the
Sel
button on the left. When entering data, the left-arrow is
used for deleting characters.
SIP settings
● Enter the IP address of
Server 1
(SIP server) that the station shall
connect to, and the
SIP ID
(directory number) of the station.
Load defaults
This will load the factory default settings.
● Press the
Sel
button to load the default settings.
Restart
This will restart the station.
● Press the
Sel
button to restart the station.
Restart the station to apply new settings.
Not Registered
Setup
State:
- Enter password
1851
Ok
Esc
Back
Sel
*
Sel
Esc
- Main menu -
Station info --
>
IP settings --
>
Station mode --
>
Load defaults -->
Restart -->
SIP settings -->
Back
Sel
Back
Sel
Press to set.
Back
Sel
Press to restart
