EN
5-3 DRC
Dynamic Range Compression reduces the volume of loud sounds or
amplifies quiet sounds by narrowing or compressing an audio signal's
dynamic range. This can be used in noisy environments.
Robio has 3 settings:
DRC off (DRC is off)
DRC low (DRC will compress 50%)
DRC high (DRC will compress 100%)
To set the DRC press the right knob for 2 seconds. Turn the knob to
“DRC” position and short press the right knob to enter menu. You can
now choose DRC high/low/off. Do this by again turning the right knob and
confirming with a short press.
5-4 Manual tuning
A manual tuning can be performed by pressing the right knob for 2
seconds. Turn the knob to the “manual tune” position and short press the
right knob.
5-5 Full Scan
When in DAB mode, press the right knob for 2 seconds. Turn the knob
to “Full Scan” position and short press the right knob.
Robio will now perform a full scan.
5-6 Recall station
To recall the station you have stored, short press the left knob and
choose the station by turning the right knob, then confirm with a
short press.
5-7 Switch stations
To switch between the available stations, turn the right knob and choose
the desired station with a short press.
8
9
You can now tune between all possible DAB stations from 5A to 13F. Short press
to see signal strength. Press the right knob for 2 seconds to listen to the 1st station.
Stations will be added on the playing list if the signal is strong enough.
