T O U C H A N O T H E R W O R L D
Naviceiver ZE-NC2010
Operation of Steering wheel control and the multi-
function display MFD+ for cars of the Golf 5 platform
4 of 4
Please note:
➔
Only the multi-function display plus (MFD+) is supported.
➔
The ZE-NC2010 and its CAN-Bus interface should only be used in automobiles mentioned
on the compatibility list. Caused by different configuration of vehicles and CAN-Bus
systems all information and pictures are without guarantee.
➔
The exfactory installed BT hands free system, the MEDIA IN, rear camera system and
also the CD-changer are not supported by the ZE-NC2010. Furthermore, the optical park
assist and active sound package (e.g. Dynaudio) are currently not supported.
➔
The automatic park assist must be reprogrammed by an authorized VW dealer to make
it run again after install the ZE-NC2010.
➔
To ensure the proper function of the ZE-NC2010, you should only use original accessories
which are included in the set content, such as GPS antenna, TMC receiver, external
microphone and Media Link Box.
➔
If you want to use optional accessories, such as rear view cameras or headrest monitors,
contact first your authorized ZENEC dealer.
➔
Since currently only the CAN-Bus system of the Golf V platform is supported, it is also
only their multifunction display supported. An indication for this is the color of the
MFD+ display, which should be red.
*1: Caused by car specific differences, this function cannot be guaranteed.
*2: For Seat vehicles with exfactory installed BT hands free, the phone control buttons are not supported.
