ZE-MC294
5
WARNINGS
PRECAUTIONS
1. Never disassemble or adjust the unit without any professional guide. For details, please
consult an authorized ZENEC dealer.
2. lf the front panel or TFT monitor needs to be cleaned, please use a clean silicone cloth
and a neutral detergent. Using a rough cloth and non-neutral detergent or all solvents (i.e.
ethanol, benzene) for cleaning may result in damage or discoloration.
3. lf any abnormal behaviour of the unit is found, please refer to the trouble shooting guide.
In case you can't determine the cause of the failure , you can always try to press the
[RESET] key on the front panel to restore factory defaults. If that doesn't help either
contact your local authorized ZENEC dealer.
4. lf you park the car for a longer time period under extreme temperatures (both extreme hot
and cold), you should refrain from switching it on immediately. Rather wait until the cabin
temperature has reached a range between minus fi ve and plus forty degrees Centigrade.
5. Using in-car heater in low temperature environment may result in condensation inside the
unit. DO NOT use the unit in this situation, eject the disc and wipe off the condensation
on the disc. lf the unit still doesn't work after a few hours, please contact with after-sales
service center.
6. To prevent damage to the screen, avoid touching it with sharp objects.
7. If the software version on your unit has been updated the icons used for this documentation
may differ from the actual images displayed on the screen.
8. Operate the unit according to this information to prevent unnecessary problems or
dangers. Be aware that you also risk your warranty if you don't use the unit in compliance
with this manual.
DECLARATION
This product incorporates copyright protection technology that is protected by U.S patents
and other intellectual property rights. Use of this copyright protection technology must be
authorized by Macrovision, and is intended for home and other limited viewing uses only
unless otherwise authorized by Macrovision.
Reverse engineering or disassembly is prohibited.
