16
USB/SD CARD OPERATION
USING SD-CARD
1. Open the cover fl ap, insert an SD-Card
into the corresponding slot. The unit then
switches to card mode, and automatically
starts to play back the fi les found on the
card.
2. To remove the card, you should fi rst
select another source, in order to avoid
damaging the card, press the card
slightly, and remove the card after it has
popped out, then dose the cap.
3. Select a different source before you
remove the inserted USB/SD data
carriers, to avoid damaging it's fi le
system.
USING USB DEVICE
1. Open the cover fl ap, insert a USB device
into the USB connector.
After connecting a USB device, the unit
will read and play the fi les automatically.
2. To remove the USB device, you
should fi rst select another source (safe
removal).
USB/SD-CARD NOTES:
USB functions and features concerning MP3
music play.
1. Supported fi le systems FAT12, FAT16,
FAT32.
2. Up to 200 directories and 500 fi les can
be displayed and played back from the
USB-data carrier.
3. Descriptors of fi les, directories and titles
shouldn't exceed 32 characters/bytes,
cause only the fi rst 32 chars will be
displayed.
4. ID tag version 2.0 is supported. However,
the length of title, artist and album
descriptor is limited to 32 chars/bytes.
5. The device supports USB 1.1 and USB
2.0 standards at the speed of USB 1.1.
PLEASE
NOTE:
■
Due to varying specifi cations of commer-
cially available USB-data carriers it
cannot be guaranteed, that each and
every USB-stick will be supported.
