8
PLACING AND CONNECTING ANTENNA
■
Identify an suitable place for installation.
■
Ideal place (on the front glass) for film antenna installation is the one that
meets the following conditions:
- Vertical: the antenna top should be at least 5 cm away from the car roof for
optimum reception performance.
- Horizontal: the antenna should be aligned with the car frame (A pillar).
■
Do not install at the following locations:
- Where it may block driver‘s view.
- Where it may obstruct operation of safety devices such as airbags.
- On movable glass surface.
Clean the area
• With wipe cleaner provided,
clean the surface where
antenna film, amplifier unit
and earth sheet is to be
placed.
• Ensure that the glass
surface is completely dry
before mounting.
• Warm the front windscreen-
glass if necessary to ensure
good adhesion.
Remove the protection slip
• Gently remove the protec-
tion slip horizontally.
• Do not touch the sticky
surface (adhesive side) of
the antenna film.
Paste the antenna
• Gently paste the antenna
along with A pillar at the
pre-set area.
• Take care not to touch the
contact port.
Installation: Step 1 to 9
Summary of Contents for ZE-DAB60
