ZENEC ZE-160DVD, Instruction Manual

Page: 15 / 72

ion
%N
11
Section
OPEN
Eject
DVD Operation
Before Operation
• Before applying laser disc operation,
please make sure monitor has been
properly connected to the unit.
• Audio output mode depends on the type
of discs and different disc has different
output mode, so carefully read the
description of disc before operation.
Release Front Panel
• Press [OPEN] button to put down the
front panel; please see sketch below for
the whole operation.
Load in Disc
• Before inserting disc, make sure no disc
is in the unit. Please see eject button is lit
or not to confirm whether there is disc or
not.
• After disc load in, please close the front
panel in order to control playback.
Eject Out Disc
• First press [OPEN] button to put down
the front panel. Then press [
@
] button,
if a disc is in the unit, the disc will be
ejected.
Note:
• In DVD mode, unloading the disc will
make the unit automatically returning to
tuner mode.
• In standby mode, inserting the disc
will turn on the system power supply
automatically.
• After inserting disc, it will take some time
to start to playback.
• This player can playback 12cm disc only.
Don`t insert 8cm disc to the loading slot.
Eject
Eject
3 05
ZE-160DVD Manual E neu-.indd Abs1:11 ZE-160DVD Manual E neu-.indd Abs1:11 07.09.2004 10:42:00 Uhr 07.09.2004 10:42:00 Uhr