ZENEC ZE-160DVD, Instruction Manual

Page: 12 / 72

%N
8
Section Sec
RESET RESET
12V
night lamp
Basic Operation
Power ON/OFF
• Press [POWER/MUTE] button to turn the
unit on.
• Press and hold [POWER/MUTE] button
until the unit is turned off.
Note:
• When one disc is loading in/out, the unit
can also be switched off.
Mute Control
• When the unit is turning on, press
[POWER/MUTE] button to mute the
sound of player. Press it again, the unit
will exit MUTE mode.
Mode Switch
• Press [MODE] button to select source
according to the following sequence:
Tuner
→
DVD (Built-in player)
→
CDC (Multi-CD changer)
→
Aux
→
Tuner
Volume Control
• Rotate the knob to boost or lower the
volume.
Switch the display mode
• Press [DISP] button repeatedly, different
displays will be switched on LCD screen
according to the following sequence, and
after 5 sec, it will turn back to the default
display of current mode automatically.
Tuner:
Frequency (default)
→
Clock
CDC:
Play time (default)
→
Clock
DVD:
Play time (default)
→
disc type
→
Clock
Aux: Aux (default)
→
Clock
Note:
• When the unit is in standby state, only
current time be displayed on LCD if the
clock display is enabled.
Set Clock
• If current display mode is Clock mode,
press and hold [DISP] to go into clock set
mode.
In clock set mode:
• Press [DISP] button will switch between
Hour and Minute setting.
• Press [
:
] button will increase time data.
• Press [
:
] button will decrease time data.
Note:
• If there is no operation within 5 sec, unit
will quit clock set mode.
RESET Switch
• Press [RESET] button to restore the
default value of system setup.
02 0
ZE-160DVD Manual E neu-.indd Abs1:8 ZE-160DVD Manual E neu-.indd Abs1:8 07.09.2004 10:41:58 Uhr 07.09.2004 10:41:58 Uhr