4
4.a
4.b
4.a Insert the mounting frame (No. 2) at an angle
from above into the radio slot.
5. (No picture)
Fit the GPS antenna (No. 6) at a suitable place,
and make sure that the GPS reception is not
adversely affected due to shadowing by metallic
vehicle parts (thermal glazing etc.). Use the
metal plate supplied as a base for the GPS
antenna to improve its reception, depending on
the situation. Next, run the connecting cable to
the radio slot.
6. (No picture)
If you wish to use it, fit the external Bluetooth
microphone (No. 7) in a suitable location, and
run the connecting cable to the radio slot.
Depending on your choice of an external or
device-internal microphone, the microphone
source for the Bluetooth mode must be
correspondingly changed in the device menu.
7. (No picture)
Run the USB extension cable (No. 10) from the
radio slot to the position you want.
4.b Screw down the mounting frame at the top and
bottom with the four Phillips screws (No. 3)
supplied with the ZENEC system kit.
