ZENEC Z-E2060 User Manual Download

Page: 29 / 40

56 Rev.A

57 Rev.A

AUDIO SETUP: EXPERT MODE

In the Audio Setup menu page with the Expert Mode set to “ON”, you can change audio relevant

settings. Such as Equalizer, Time Alignment, Navi-Mixer, etc. Please refer to the listings on the

following pages.

Function

Icon

Operation

Expert Mode

Tap to enable or disable expert mode

Volume

Tap to set start and source volume

Balance/Fader

Tap to set fader or balance

Equalizer

Tap to set the 10-band equalizer

Time

Alignment

Tap to make settings for the time alignment

Subwoofer

Tap to set subwoofer settings

Navi-Mixer

Tap to set navi voice output configuration

Audio

Control

Touch to make general quick audio settings (Loudness /

Suboofer etc.)

Can be accessed by long press of the Home button.

AUDIO VOLUME – BASE LEVEL SETUP

Function

Icon

Operation

Media Volume

Tap to set the media playback volume

Navi Volume

Tap to set the volume of the Navi voice

BT Call

Volume

Tap to set the volume of the Bluetooth handsfree volume

In the audio menu, you can adjust the basic volume values of the various audio sources.

Fine adjustment of the volume of all "Gain" sources

FM Tuner

Gain

Fine adjustment of FM volume

DAB Tuner

Gain

Fine adjustment of DAB volume

USB

Gain

Fine adjustment of USB volume

Summary of Contents for Z-E2060









































Search results

Summary of Contents for Z-E2060

Reviews:

Related manuals for Z-E2060

Brands by name

Popular brands

ZENEC Z-E2060, User Manual

Search results

Summary of Contents for Z-E2060

Reviews:

Related manuals for Z-E2060

Brands by name

Popular brands