5
TURN ON / OFF
Manual On / Off
Press the button to turn the ZENEC system on, long press turn off (fig. S/01
).
Automatic On / Off
Vehicles with CAN bus interface:
Switching on the ignition will activate the ZENEC system. The boot process can take up to 1.5 minutes.
This may result in some delay until the system is ready. The ZENEC system is shut down by switching
off the ignition, or removing the ignition key.
BASIC OPERATION
The ZENEC system is equipped with an anti-theft protection function. If this is active, on restarting the
ZENEC system after interruption of the power supply you will be asked to enter your password.
To change the password:
Device User Manual → Setup → Device Setup → Help → Password
Z-E3726
5
GERÄTEBEDIENUNG – Z-E3726
GRUNDSÄTZLICHE BEDIENUNG
EIN-/AUSSCHALTEN
Manuelle Ein-/Ausschaltung
Drehregler links gedrückt halten, bis sich das ZENEC-System ein- oder ausschaltet
(Abb. S/01
)
Automatische Ein-/Ausschaltung
Fahrzeuge mit CAN-Bus Anbindung:
Bei Einschalten der Zündung wird das ZENEC-System
aktiviert. Der Bootvorgang kann max. 1,5 Minuten in Anspruch nehmen. Dies kann zur Folge
haben, dass das System nur mit Verzögerung einsatzbereit ist. Das Ausschalten des ZENEC-
Systems wird durch das Ausschalten der Zündung oder Abziehen des Zündschlüssels aktiviert.
HINWEIS
Für eine Nutzung des Multifunktionslenkrads sowie weiterer Fahrzeugfunktionen wird ein
fahrzeugspezifisches CAN/Stalk Interface benötigt. Weitere Informationen erhalten Sie bei einem
autorisierten ZENEC-Fachhändler.
DIEBSTAHLSICHERUNG
Das ZENEC-System ist mit einer Diebstahlschutzfunktion ausgestattet. Ist diese aktiv, werden Sie nach
Trennung der Stromversorgung bei erneutem Einschalten des ZENEC-Systems aufgefordert, das von
Ihnen hinterlegte Password einzugeben.
Um das Passwort zu ändern:
Bedienungsanleitung
Einstellungen
Geräte Konfiguration
Help
Passwort
HINWEIS
Bewahren Sie das
Passwort sorgfältig auf.
Bei einem Verlust des
Passworts muss das
ZENEC-System ausgebaut
und zur Freischaltung des
Diebstahlschutzes an den
ZENEC-
S
ervice
eingesendet werden.
Dieser Dienst ist
kostenpflichtig!
NOTE
In the case of software updates by the vehicle manufacturer, communication failures and
malfunctions between the vehicle and the ZENEC system may appear.
ANTI-THEFT PROTECTION
NOTE
Keep your password safe.
If the password is lost the
ZENEC system must be
uninstalled, and sent back in
to ZENEC Service to release
the anti-theft protection.
There is a charge for this
service!
Summary of Contents for Z-E2026
Page 1: ...Z E2026 DEVICE QUICK START GUIDE EN ...
Page 15: ...15 ...
Page 16: ... Copyright 2016 RevA copy deadline Q1 2016 English ...