Zendure AB2000, User Manual

Page: 15 / 83

4
EN
Add-on Battery AB2000
5. Parts and References
5.1 What’s in The Box
User Manual
Do not place AB2000 in direct sunlight.
Product and component images may differ from actual products. If any parts
are missing or defective, please contact Zendure customer support.
The AB2000 will forcibly implement a discharge lower limit of 5% in the
following situations:
• Battery temperature < -5° C
• Battery temperature < 0° C for 30 mins
This can prevent over-discharging of the AB2000 and extend the
battery life.
It is recommended to use AB2000 in an environment at 15℃ ~30℃ ,
away from water, fire and other sharp objects.
For long-term storage, please charge and discharge AB2000 once
every 3 months. That is, discharge AB2000 to 30% SOC first, and then
recharge it to 60% SOC.
When using for the first time, please remove the charge and discharge
limit of the battery, and then perform the following cycle once:
discharge the battery to 0%, then charge it to 100%.
If the power of AB2000 is lower than 1% SOC after use, please charge
it to 60% SOC before storing it. Leaving the battery discharged for a
long time can cause irreversible damage to the battery and shorten
the service life of AB2000.
Do not disassemble AB2000. When service or repair is required, please
consult official Zendure channels. Improper disassembly or reassembly
may result in a risk of fire or personal injury.
4. Maintenance and Important Information
60%
Mounting kit