Zenaji Aeon A48-40-01 Installation Manual Download Page 9

Aeon Battery Installation Manual V1.2 JAN 2020  |  pg. 9

2

SAFETY

2.3.2 

Battery Handling

• 

Ensure circuit breaker on the base of the battery is set to OFF when handling, 

transporting, connecting or disconnecting the battery.

• 

Two person lift, 36kg (39kg net packaged), ensure any lifting calculations are carried 

out as according to state regulations.

• 

Do not expose battery to open flame.

• 

Do not expose battery to temperatures over 60°C

• 

Do not damage the unit in any ways physical such as crushing, dropping, piercing 

with a sharp object, impacting. This may cause leakage of electrolyte or short circuit 

with the risk of fire.

• 

Do not connect positive and negative wires to each other causing a short circuit.

• 

Do not charge or discharge damaged battery.

• 

Do not place the battery with the connection cable on the ground.

• 

Unqualified personnel are not to disconnect, disassemble or repair the battery. 

Services must be made by Qualified Personnel only.

• 

Ensure Connection cables ends are not exposed prior to final connection to power 

equipment.

• 

Keep out of reach of children and animals

• 

All wiring must be protected from intrusion and cutting.

• 

Store the battery in a dry place.

• 

Ensure temperature is maintained between -5°C to 35°C when handling or 

transporting the battery (recommended 20°C to 30°C).

• 

No foreign object is to be placed on top of the battery.

• 

Only use battery with Zenaji authorised power equipment.

• 

Do not immerse in water.

2.3.3 Hazards

Leaking electrolyte and gases can cause irritation and harm.

• 

Skin:

 On contact, the electrolyte  solution contained in the battery causes irritation 

to skin. Symptoms include irritation and burns.

• 

Eyes:

 On contact, the electrolyte solution contained in the battery or gases released 

due to battery damage cause irritation to ocular tissue and skin around the eyes. 

Symptoms include irritation, redness, tearing and burns. The electrolyte is corrosive 

to all ocular tissues.

• 

Inhalation:

 Gases due to high heat or abundance of leaking batteries cause burns 

of the respiratory system. Symptoms include coughing, wheezing, and shortness of 

breath.

• 

Ingestion:

 The ingestion of the battery is harmful. Content of the battery can cause 

serious chemical burns to the mouth, oesophagus and gastrointestinal tract. 

Summary of Contents for Aeon A48-40-01

































Reviews: