Chapter 4: Cleaning and Maintenance
COOLTONE User Manual
36
-C
Routine inspection of equipment
1. The covering for the power line of equipment, applicator connecting line, etc. shall not be peeled
off and internal lines shall not be exposed and shall not be damaged by impact from outside.
2. There shall be no trace of oil leakage from applicator.
3. Assure there is no foreign material on the outside of the equipment.
4. The button for equipment operation, etc. must not shake.
5. The various parts attached to the device must not shake.
6. If any of the above occurs, contact Zeltiq Customer Service for assistance.
Safety inspection
1. In order
to ensure safe use, be sure to check the equipment including internal components and
output voltage by the person who has been given authorization from the company once per
year.
2.
Please clean the applicator before storing.
3.
After storing the device for a long period of time, be sure to check the device before using it.
4.
Please note the following regarding storage conditions:
• Keep out of water
• Keep the control monitor in an upright position
• Keep away from direct sunlight
• Do not store near heaters
• Avoid locations subject to excessive shock or vibration, exposure to chemicals or
explosive gases.
The CoolTone is manufactured according to the safety regulations of IEC 60601-1, Rev 3.1.
The manufacturer can only be considered responsible for the safety and reliability if:
1.
the device is operated using a proper power outlet that is properly grounded and the
electrical installation complies with the National safety requirements,
2.
the equipment is operated in accordance with the instructions for use,
3.
extensions, readjustments or modifications are carried out only by Zeltiq Customer
Service.
4.
the device is operated only by properly skilled personnel,
5.
the device is not operated in hazardous areas and / or a combustive atmosphere,
