62
ZVC752-004_v01
Ecology – environment protection
Each user can protect the natural environment. It is neither
difficult nor expensive.
In order to do it: put the cardboard packing into
recycling paper container; put the polyethylene
(PE) bags into container for plastic.
When worn out, dispose the appliance to
particular disposal centre, because of the
dangerous elements of this appliance, which
can be hazardous for natural environment.
Do not dispose the appliance with the municipal waste!
●
Disconnect the telescopic tube from the hose and the
nozzle or brush.
●
Pour the dirty water out of the container.
●
It is recommended to wash the container, filters
(disassembly below) and partition thoroughly after each
use – changing water several times.
●
After using the wet cleaning function thoroughly wash
all attachments used in this process (hose, tubes,
accessories).
If you do not clean the above-mentioned parts
or clean them insufficiently it may lead to the
loss of the filtration capabilities of the inserts
and foam and cause the formation of bacteria
and mites.
Dry all the cleaned parts thoroughly before
reassembly.
FILTER DISASSEMBLY
FOAM FILTER I
1
Open the lid of the filtration unit by pulling the handle
upwards.
2
Take out the filter, wash it under running water, dry and
reinsert.
●
Close the filtration unit lid by pressing it until you hear
a characteristic click.
FOAM FILTER II
It is recommended to wear rubber protective gloves while
dismantling the filter.
1
Grab the foam filter with your fingers and remove it from
the filtration unit body.
2
Wash under running water, dry and reinsert.
Do not hand wash the filter foam, do not wring
it, do not wash it in washing machines. Avoid
crumpling, stretching and deforming. After
cleaning dry the foam in room temperature.
Never dry the foam on heaters, stoves, etc.
EPA OUTLET FILTER AND COOLING AIR FILTER
The EPA outlet filter should be replaced after about 30 hours
of operation (6 months) or earlier in case of heavy dirt.
1
Slide the slider of the filter cover interlock downwards
and open the filter cover.
2
Remove and replace the EPA filter with a new one when
the filter becomes dirty.
3
Remove and replace the motor filter with a new one
when the filter becomes dirty.
4
It is possible to rinse the EPA filter and the cooling air
filter under running water. Remember to dry the above
mentioned filters before reassembly.
●
Close the filter cover and slide the interlock slider
upwards.
G
H
I
The manufacturer does not accept any liability for any damages
resulting from unintended use or inappropriate handling.
The manufacturer reserves his rights for modifying the product any
time in order to adjust it to law regulations, norms, directives, or due
to construction, trade aesthetic or other reasons, without notifying it
in advance.
Summary of Contents for ZVC752 SERIES
