Zelmer ZVC235SK, User Manual

Page: 59 / 64

65
ZVC235-001_v03
Design
A
1 Outlet filter cover
2 Fastening for the nozzle brush
3
Plug with the power cord
4 Locker for the crevice nozzle
5 Fastening of the upper cover
6 ON/OFF button
7 Suction power regulation dial
8 Cord winder button
9 Handle
10 Bolt – a mechanic controller of suction power
11 Suction hose
12 Telescopic suction pipe
13 Outlet microfilter (installed in the vacuum cleaner)
14 EPA E12 basic filter (installed in the CYKLON dust
container)
15 EPA E12 basic filter protective casing (installed in the
CYKLON dust container)
16 CYKLON dust container (a removable part of the vacuum
cleaner)
17 CYKLON dust container cover
18 Switchable combination brush
19 Crevice nozzle
20 Small brush
21 Small nozzle
22 BNB (Brush Natural Bristle) floor brush (an additional
accessory – available in retail outlets with vacuum
cleaners)
Before first use
B
1 Put the end of the suction hose to the inlet of the vacuum
cleaner. Pay attention to insert the protrusions situated on
the end of the hose into the special incisions in the inlet of
the vacuum cleaner.
2 With a clockwise movement turn the end of the suction
hose tight.
Technical parameters
The type of the vacuum cleaner and the technical parameters
are indicated on the rating label. Mains protection 16 A. Does
not cause interferences with audio/video devices.
Does not require grounding
.
ZELMER vacuum cleaners meet the requirements of the
applicable norms.
The appliance is in conformity with the requirements of the
directives:
–
Electrical equipment designed for use within specific
voltage limits (LVD) – 2006/95/EC.
–
Electromagnetic compatibility (EMC) – 2004/108/EC.
The device meets the requirements of Commission
Regulation (EU) No. 666/2013 on implementing the Directive
of the European Parliament and of the Council 2009/125/EC
with regard to eco-design requirements for vacuum cleaners.
The device complies with the requirements of the
Commission Delegated Regulation (EU) No. 665/2013
supplementing Directive of the European Parliament and of
the Council 2010/30/EU with regard to energy labelling of
vacuum cleaners.
Noise level: 84 dB(A).
The appliance was marked by a CE sign on the rating label.
Static electricity
In the process of vacuuming of some surfaces in areas of
low air humidity the device may become electrically charged.
It is a natural phenomenon – it does not damage the device,
and it is not considered to be a fault.
In order to minimize the phenomenon, we recommend you to:
●
discharge the device by touching metal items in the room
with the pipe,
●
increase air humidity in the room,
●
use widely available antistatic agents.
TYPES OF ZVC235 VACUUM CLEANERS
Design and
accessory
options
Type
Suction power control
Basic filter
Outlet filter
Suction pipe
Nozzle brush
Small nozzle
Crevice nozzle
Small brush
Parquet brush “BNB”
1 2 3 4 5 6 7 8 9 10
ZVC235SK
+
EPA E12 Microfilter Telescopic
+ + + + –
ZVC235SF + EPA E12 Microfilter Telescopic + + + – –