Zelmer ZSVC925F KAROL, User Manual

Page: 16 / 68

16
PL EN
7b – press the switch on/off to turn on, the machine will start to operate in standard suction mode. Press the
switch on/off again to turn off the vacuum
Foldable aluminum alloy tube
Press the button to fold the tube.
Bent the tube to make it stand upright (FIG.8)
MAINTENANCE
Please clean it regularly to prolong the service life of the vacuum cleaner. Wash the filter unit with cold water
at least every month.
Main body (hand-held, non-washable parts) cleaning:
Turn off the power before cleaning the body
Please use a neutral detergent, wipe the body with half-wet cloth
Please avoid sun exposure and store in a cool and dry place.
DUST BOX CLEANING
Press the release button to open the dust box lid, dump out the trash (FIG.9)
Press the main body release button to remove the main body (FIG.10)
Twist the dust box anticlockwise to remove the dust box and take out the filter (FIG.11)
Clean the filter and dust box with or without water and dry it ( FIG.12)
Install the filter in correct direction, make the buckles in right place and twist to fix it. (FIG.13)
Install the main body. Put the hook into the hole, push the rear part and stop until hearing the sound of
locking. (FIG.14)
BRUSH ROLLER CLEANING
Ensure the appliance is disconnected from the charger before removing the brush roller. Be careful not to
pull the ON trigger.
Twist the button counterclockwise and pull out the brush roller
Tilt and shake to pour out the roller, use the brush cleaning tool to sweep away the trash on the roller.
The brush roller is washable. Before replacing, check the brush roller is completely dry.
Push in and twist the button clockwise to install the brush roller (FIG.15)