Zelmer ZSVC925F KAROL, User Manual

Page: 15 / 68

15
PL EN
B&B TRENDS SL. disclaims all liability for damages that may occur to people, animals or objects, for the
non-observance of these warnings.
INSTRUCTION OF USE
Note:
Before using the Cordless Vacuum cleaner for the first time, clean it with a soft, damp cloth and dry
thoroughly.
Do not immerse the Cordless Vacuum cleaner in water or any other liquid.
1. Remove the vacuum cleaner from the carton, remove all stickers, shipping blocks, bags, and fillers.
2. Inspect the vacuum cleaner for any damage that may have occurred in transit. Contact your dealer if you
suspect damage.
3. Assemble the vacuum cleaner properly (see section: „Assembling the Vacuum Cleaner”).
4. Charge the battery (see section „CHARGING THE BATTERY”).
5. Make sure that your mains supply corresponds with the data on the charger’s name plate.
Assembling the Cordless Vacuum cleaner
Assembling the aluminum tube (FIG.1)
Fit the tube into the main body’s air inlet until it clicks into position.
Charging
Attention: Please ensure that it is fully charged (FIG..2) when using it for the first time. Please run out the
battery power before first charge to extend the product life (FIG..3)
Brush Introduction
Crevice nozzle tool
Remove dust on hard-to-reach area like window gap, bed feet, gaps between tables and chairs, etc. (FIG.4)
2 in 1 Brush Tool
Removes dust and hair on carpets and other surfaces. (FIG.5)
HOW TO USE
Preparing
Please confirm if the vacuum is fully charged before using. Please charge it for more than 5 hours before the
first use to ensure the normal operation of the product. Then select the appropriate brush head according
to the area need to be cleaner (check the „brush instructions”)
Battery install and remove
Press the release button and drag the battery to remove it. Press the release button and push the battery
to install it. (FIG.6)
Operating
Switch on/off and charge suction mode (FIG.7)
7a – press the suction mode switch to change the suction mode