Zelmer ZSM1001S, User Manual

Page: 47 / 52

47
GW26-007_v08
Technical data
The technical parameters are given on the data plate of the
product.
Characteristics of the appliance
A maker enables a quick preparation of warm es with filling.
One or two slices of toasting bread can be toasted at a time.
The heating plates of the sandwich maker are divided into
four triangular spaces and are covered with a teflon coating
which prevents the sandwiches toasted from adhering to the
heating plate. Connecting metal elements with parts made
of plastics creates an interesting exterior of the sandwich
maker. There are two control lights on the sandwich maker
which signal as follows:
–
red – power on,
–
green – ready to toast.
The structure of the sandwich maker
1
Red light
2
Green light
3
Upper body
4
Lower body
5
Fastener
6
Lower heating plate
7
Upper heating plate
Operation and functioning of the maker
Before using the sandwich maker for the first time:
●
remove all packaging,
●
check that the voltage specified on the appliance is
compliant with the mains voltage,
●
clean the appliance by wiping its outside and inside
surfaces with a damp cloth o paper towel,
●
turn it on for 15 minutes so as to remove all residue from
the manufacturing process; next switch the sandwich
maker off and allow it to cool.
In further operation of the sandwich maker:
●
place it on a dry, flat surface near a mains socket,
●
insert the plug of the connecting cord into the mains
socket (the red control lamp will come on),
●
please wait until the green control lamp comes on
(it takes about 3–4 minutes) which means that the
heating plates have reached the appropriate temperature
for preparing sandwiches,
●
open the sandwich maker,
●
take an about 1 cm thick, buttered (or smeared with
another type of fat) slice of toasting bread and place
it buttered side down on the lower heating plate of the
sandwich maker,
●
place filling on the slice of bread,
●
cover the filling with another slice of bread, buttered
side up,
●
carefully close the sandwich maker; in case it is difficult
to close the sandwich maker, remove excess filling; the
sandwich maker should not close with difficulty as it may
cause damage to it,
●
after a few minutes (toasting time depends on the type of
recipe or user’s preferences), open the sandwich maker
and take out the toasted; when taking the out of the
sandwich maker, be careful not to:
7
6
1
2
3
4
5
1
2
3
4
5
Type 26Z010
Type 26Z011
HINT
Information on the product and
hints on its use
●
The appliance is intended solely for household use,
indoors.
●
Never place the appliance on or near gas or electric
cookers or in places where it might touch a hot oven
or microwave.
●
Never cover the appliance when it is hot or connected
to the mains supply.