Zelmer ZSB1200 Series, User Manual

Page: 34 / 38

EN
36
32Z012-002_v04
Dear Customer,
Congratulations on your choice of our appliance and
welcome to the group of Zelmer product users.
Please, read these instructions carefully. Special attention
should be paid to safety information. Keep this manual so
that you can refer to it in the future.
Safety operation instructions
Please read the entire user manual before using the
appliance.
●
Do not put your hands inside the jug,
even if it is removed for cleaning, as
the cutting blades are still dangerous
– very sharp.
●
Do not put any objects (spoon, etc.)
into the jug, when the blender is
connected to power supply.
● Do not wash the cutting blades
directly with hand.
●
Use the soft brush for washing metal
parts, especially the sharp blades.
●
This product is not intended for use by
children. Keep the appliance and the
power cable out of reach of children.
●
Appliances can be used by persons
with reduced physical, sensory
or mental capabilities or lack of
experience and knowledge if they
have been given supervision or
instruction concerning use of
the appliance in a safe way and
understand the hazards involved.
●
Children shall not play with the
appliance.
DANGER! / WARNING!
Risk of injury
●
Always place the appliance on flat,
plain surface.
●
Always unplug the appliance from
the electrical outlet when it is left
unattended and before assembling,
disassembling and cleaning.
● Do not operate the appliance if the
cord, the housing or the handle is
visibly damaged. In such a case, return
the appliance to a service center.
●
If the supply cord is damaged, it must
be replaced by the manufacturer, its
service agent or similarly qualified
persons in order to avoid a hazard.
●
The appliance should be repaired by
trained staff only. Improper repair can
result in serious hazard for a user.
In case of defects we recommend
you to contact qualified service desk.
● Do not immerse motor housing in
water or any other liquid; do not use
it in bathroom and outdoors.
●
Press „ OFF ” button, before you
remove the lid of the jug and remove
the jug from the motor housing, wait
until the blades stop completely.
●
Do not use stand blender without
feeder opening stopper.
WARNING!
Risk of property damage
●
Always plug the appliance to the mains (AC only) with
voltage corresponding to that indicated on the rating
plate.
●
Do not unplug by pulling on cord.
●
The supplying cord shall not be hanged over the edge
of the table or board, nor touch any hot surface.
●
Do not fill the jug in with boiling liquids.
●
Keep the stand blender and supplying cord away from
hot surfaces and burners.
●
If it is possible, store the stand blender away from
direct sun radiation and glow-like light.
●
Never store with lid closed on the blender jug. Damp
the lid gasket with water before usage, and insert the
lid on the jug.
●
Do not overflow the jug. In case the liquid gets under
the motor housing, it can be vacuumed into the motor,
causing its damage.