Zelmer ZMM4045B, User Manual, Page: 18 / 84

18
PL EN
IMPORTANT WARNINGS
This appliance is designed for home use and should never be used for commercial or industrial use
under any circumstances. Any incorrect use or improper handling of the product shall render the
warranty null and void.
Prior to plugging in the product, check that your mains voltage is the same as the one indicated on the
product label.
The mains connection cable must not be tangled or wrapped around the product during use.
Do not use the device, or connect and disconnect to the supply mains with the hands and/or feet wet.
Do not pull on the connection cord in order to unplug it or use it as a handle Unplug the product
immediately from the mains in the event of any breakdown or damage and contact
This appliance is designed for home use and should never be used for commercial or industrial use
under any circumstances. Any incorrect use or improper handling of the product shall render the
warranty null and void.
Prior to plugging in the product, check that your mains voltage is the same as the one indicated on the
product label.
Do not pull on the connection cord in order to unplug it or use it as a handle
.
Do not process tough foods, such as bones, nuts (such as dry and hard soybeans) or other food with
tough fiber.
Please utilize the feeder push during operation, instead of pushing food by hands.
Check the filter before squeezing juicer per time. Do not use the juicer any more in case of any cracks or
damage, and get in touch with the nearest dealer and manufacturer.
Unplug the product immediately from the mains in the event of any breakdown or damage and contact
an official technical support service. In order to prevent any risk of danger, do not open the device. Only
qualified technical personnel from the brand´s Official technical support service may carry out repairs or
procedures on the device.
B&B TRENDS, S.L.
disclaims all liability for damages that may occur to people, animals or objects, for
the non-observance of these warnings.
INSTRUCTIONS FOR USE
Meat Grinder
The continuous operation should not exceed 10 minutes; suspend the operation in the event of
exceeding 10 minutes and restart the machine after cooling down.
Installation method for meat grinder.
Step 1: hold and tilt the tee-junction of minced meat toward the switching push button at about 45
degrees embedded in the output gear, anticlockwise screw in the body (as shown in the picture) for
fastening, and the lock button will automatically fix the tee-junction. (Fig . 1)
Step 2: put the screw into the tee-junction of minced meat (as shown in the picture) (Fig . 2)
Step 3: assemble the crossblade on the screw shaft (as shown in the picture) with blade outward (failure
will be caused by incorrect placement). (Fig.3)
Step 4: attach the mesh sieve to the crossblade (select micropore mesh sieve, mesopore mesh sieve
and macropore mesh sieve as needed), and lock the half slot of mesh sieve to the adjusting pin of tee-
junction (as shown in the picture). (Fig.4)
Step 5: press on the center of the mesh sieve with one hand and screw the aluminum alloy cap with
the other hand (as shown in the picture). (Fig.5) Tighten the sieve firmly but without forcing too much to
achieve suitable performance.
Step 6: put and fix the material plate into the tee-junction, and fix the assembled appliance on a stable
surface. (Fig.6)