Zelmer ZJE5750, User Manual

Page: 7 / 44

7
PL EN
physical, sensory or mental capabilities or lack of
experience and knowledge if they have been given
supervision or instruction concerning use of the
appliance in a safe way and if they understand the
hazards involved.
Children shall not play with the appliance.
IMPORTANT WARNINGS
This appliance is designed for home use and should never be used for commercial or industrial use
under any circumstances. Any incorrect use or improper handling of the product shall render the
warranty null and void.
Prior to plugging in the product, check that your mains voltage is the same as the one indicated on the
product label.
The mains connection cable must not be tangled or wrapped around the product during use.
Do not use the device, or connect and disconnect to the supply mains with the hands and / or feet wet.
Do not pull on the connection cord in order to unplug it or use it as a handle
Unplug the product immediately from the mains in the event of any breakdown or damage and contact
an official technical support service. In order to prevent any risk of danger, do not open the device. Only
qualified technical personnel from the brand´s Official technical support service may carry out repairs or
procedures on the device.
Eurogama Sp. z o.o. disclaims all liability for damages that may occur to people, animals or objects, for
the non-observance of these warnings .
INSTRUCTIONS FOR USE
Before Using
1. This machine is set with safety unit, when the handle does not fasten the cover or the cutter seat is
not fastened, the motor cannot turn, so as to ensure safety for the user.
2. When disassembling or assembling the juicer, press the upper of feed port of the cover with your
hand, then force the handle to slide in or out of cover slot.
3. When disassembling juicing net, first remove the cover and residue barrel, then turn the middle ring
up to 30 degrees by holding juicing nozzle with your hand, and take up, the juicing net will automatically
leave the rotor.
4. In order to avoid damage, before using, first check power supply for compliance with rated voltage.
5. Clean all parts able to disassemble (refer to the section of “maintenance and cleaning”).
7. Please carefully read the “attentions” before using.
Juicing
1. Before using, please confirm the button switch of the main machine in stop state, in this way, in case
assembly is not completed, starting the main machine can be avoided, so unnecessary damage for
persons or property avoided.
2. Before juicing, first confirm juicing net and rotor clutched in position, and no hard contact between
juicing net cutter and transparent cover. Put the transparent cover on, put the handle into the cover slot,
then turn on the machine.
3. Turn on power supply, press switch to let the machine run no-load for 5 sec. Put prepared vegetable