Zelmer ZFD2050W, User Manual, Page: 32 / 33

32
Never use the appliance with trays in the folded
position!
For even drying result, it is recommended to
change the position of sieves from time to time
during operation. Note that drying products
with high water content, such as plums, grapes
or wet mushrooms takes much more time.
5 The power level switch can be adjusted between two
positions: level I (250 W) and level II (500 W). To change
the power level, set the switch 2b to one of the available
positions (other than the starting position). An indicator light
2b will come on after setting the switch to level II.
6
After operation, switch off the appliance by setting the
ON/OFF switch
2a
to OFF position.
Overheat protection
The dryer is equipped with a thermal protection system:
Circuit breaker – in case of excessive temperature increase,
the heating element will disengage automatically and the fan
will remain on. The heating element comes on again once
cooled down to normal service temperature.
Troubleshooting
The fan or the heating element does not work:
●
Return the appliance to a service centre.
Cleaning and maintenance
●
Wash the drying trays and the lid in warm soapy water.
They are also suitable for dishwasher at max. 60°C.
●
Clean the heating and ventilation unit 1 with a damp
cloth and wipe dry.
●
Plastic parts of the appliance may change colour during
long-term use. It is normal and should not be considered
a defect.
●
Dry all parts thoroughly after cleaning.
Disposal
Dispose of packaging in an environmentally-
friendly manner. This appliance is labelled
in accordance with European Directive
2012/19/EU concerning used electrical and
electronic appliances (waste electrical and
electronic equipment – WEEE). The guideline
determines the framework for the return and recycling of
used appliances as applicable throughout the EU. Please ask
your specialist retailer about current disposal facilities.
Technical data and description
The technical data are given on the nameplate.
Nominal capacity: 11 l.
Noise level (L
WA
): 66 dB/A.
Construction of the appliance
1 Heat-and-ventilation unit
2 Control panel
a
On/Off switch with indicator light
b Power level switch (I/II) with indicator light for level II
power setting
3 Drying trays (4 pcs.)
The drying trays may be adjusted between two positions:
a
Folded position – only for storing the appliance
(saving space)
b Extended position – for using the appliance (a large
gap is visible between the trays)
4 Lid
5 Cord storage compartment
6 Power cord
Use and operation
Before using the appliance for the first time,
disassemble it and wash all parts that come
into contact with the processed food products
(see “Cleaning and Maintenance”). Reassemble
once dry.
1 Place the appliance on hard, dry and level surface near
a wall socket.
2 Distribute the food on drying trays and place the trays
in the extended position 3b on the heat and ventilation unit
1 . Apply the lid 4 . To extend the trays, rotate them 90
degrees relative to each other so that a large gap is visible
between them.
Distribute food products loosely on trays,
making sure not to block the airflow through the
trays. Choose the number of trays according to
the amount of food you intend to dry.
Dehydration is achieved by the circulation
of hot air through the trays. The drying time
depends on the content of water in products
and their fragmentation. For example, when
drying apples, it is recommended to use slices
not thicker than 5 mm.
3 Insert the plug into a wall outlet.
4
Switch on the appliance by switching the ON/OFF button
2a to ON . The indicator light 2a will come on.
A
B
The manufacturer does not accept any liability for any damages
resulting from unintended use or improper handling.
The manufacturer reserves his rights to modify the product any time
in order to adjust it to law regulations, norms, directives, or due to
construction, trade, aesthetic or other reasons, without notifying in
advance.