58
b) the safety valve activates,
c) the vacuum cleaner operates poorly,
d) the dust bag is full.
Dust container „CYKLON” disassembly/
assembly
The vacuum cleaner is equipped with removable dust
container „CYKLON” for collection of impurities. The dust
container „CYKLON” should be emptied when full.
Turn off the vacuum cleaner by pressing the on/off switch
●
(7)
.
Remove the connecting plug from power socket.
Press two side buttons placed on the end of hose, and
●
remove the hose end from the inlet of vacuum cleaner.
Release the front cover catch
●
(15)
and open it.
1
Put out the dust container „CYKLON” from the chamber
of vacuum cleaner.
2
Deflect the catches on the cover of dust container
„CYKLON” and open it until locked in the final position
(one can hear a characteristic “click”). Remove all collected
garbage from container.
ATTENTION! When the above operation is completed,
check the basic filter HEPA and clean or replace it if
necessary.
3
Close the cover of dust container „CYKLON”, tighten the
lock strongly until you hear the characteristic sound („click”).
ATTENTION! The container must be accurately closed.
Otherwise the dust will move to chamber of vacuum
cleaner, and the suction power will decrease.
4
Put the empty dust container „CYKLON” into the chamber
of vacuum cleaner.
Close the cover by pressing it until you hear the
●
characteristic „click” sound.
Special accessories
The following special accessories may be purchased in retail
outlets:
Zelmer electrobrush (35)
Only the electrobrush manufactured by ZELMER may be
used with ZELMER vacuum cleaners. Using other brands of
electrobrushes may cause damage to the vacuum cleaner.
The electrobrush may be used with all ZELMER vacuum
cleaners equipped with the appropriate electrobrush socket.
While using the electrobrush follow the instruction manual.
The electrobrush is especially helpful in cleaning worn out
carpets. Before vacuuming remove all larger elements from
the floor such as: remains of cloth, paper etc. in order to
prevent blocking of the whirling element of the brush.
Zelmer turbobrush (34)
May be used with all types of ZELMER vacuum cleaners. Is
used for an effective vacuuming of carpets and fitted carpets.
While using the turbobrush follow the instruction manual.
The use of the turbobrush decidedly increases the
effectiveness of removing fibrous dirt such as: animal hair,
hair, threads etc. It is practically useful in households with
pets (cats, dogs), where removing the animal hair from the
carpets and floorings is very onerous.
End of operation cleaning
and maintenance
Switch off the vacuum cleaner by pressing the “on/off”
●
button
(7)
.
Unplug the appliance.
●
1
Wind the cord by pressing the cord rewind button
(12)
.
While doing this hold the cord to make sure it is not tangled
and the plug does not hit the vacuum cleaner housing.
Disconnect the telescopic tube from the nozzle or brush.
●
2
Disconnect the telescopic tube from the hose. In order to
remove the tube from the hose handle press the
“A”
locking
device and pull the tube in the direction of the arrow.
3
Press the two side buttons on the end of the hose and
remove the hose end from the inlet opening of the vacuum
cleaner.
4
The vacuum cleaner may be stored vertically or
horizontally. In order to do so, insert the fastening hook of
the combination brush to the combination brush fastener.
The hose may be attached to the vacuum cleaner, however
you have to make sure that it is not excessively bent during
storing.
If necessary wipe the housing and the dust bag container
●
with a damp cloth (it may be soaked with dishwashing
liquid) and dry it or wipe until dry.
Do not use abrasive detergents or solvents.
Examples of problems while operating the
vacuum cleaner
PROBLEM
ACTION
A characteristic “fluttering”
of the vacuum cleaner is
heard which indicates the
opening of the safety
valve.
• The dust bag may be full – replace
the dust bag.
• Replace the dust bag even if it is not
full yet. In unfavorable conditions, fine
dust might have clogged the pores on
the surface of the dust bag.
• The suction tube, the hose or the
attachment is blocked – remove the
cause of the clogging.
The dust bag is damaged. Remove the dust bag and the filters.
The suction power of the
vacuum cleaner is weak.
Replace the dust bag and the filters,
check the suction tube, the hose and
the nozzle - remove the cause of the
clogging.
The electrical installation
fuse went out.
Check if other appliances are not
plugged to the same electrical circuit
as the vacuum cleaner. If the fuse
goes out repeatedly, return the vacuum
cleaner to a service point.
H
I
