Zelmer sc1600-001, User Manual

Page: 74 / 76

80
SC1600-001_v03
●
Using button select the automatic program
or .
●
Set the preferred cooking time using and
buttons .
●
To save the set time, press button .
Once set automatic program has the
same value for all steam generators. Automatic
program must be defined separately for
each steam generator.
Settings are kept for as long as the steam
cooker is plugged into the mains (and the
power supply is maintained).
KEEP WARM FUNCTION
Duration of the KEEP WARM program depends
on whether the program was activated
automatically when cooking time ended or
it has been enabled by the user. In the first
case, the program stops after 60 minutes and
in the other, the user is able to set the time in
the range of 30-60 minutes (default value is 30
minutes).
MANUAL
Steamed food is the most aromatic and healthy immediately
after preparation (cooking). If, however, it is necessary to
keep the food warm for a short time, use an automatic keep
warm program
.
●
Using button select program.
●
Default time for this function is 30 minutes. If necessary,
using the
and buttons, adjust cooking time to
suit your needs.
The maximum time is 60 minutes.
Before starting the keep warm program, make
sure that there is sufficient water in the water
reservoir.
AUTOMATIC
After cooking is finished, you will hear a beep and the keep
warm function
will start for 60 minutes automatically.
After 60 minutes, the appliance turns off automatically.
Helpful hints
●
Cooking in the upper steam bowls may require a longer
cooking time, due to lower steam temperature.
●
If you cook meat, fish or poultry, always place these
products in the lower steam bowls so that juices from
raw or partially cooked meat do not drip on other food.
●
It is recommended that portions of the products were
of similar size. If the portions are of different sizes, it is
necessary to stack them in layers, smaller pieces on top.
●
Products in steam bowls are not to be pressed. Keep
space between the product portions to provide maximum
steam flow.
●
When cooking large quantities of products, remove the
lid in the middle of cooking and stir the food with a tool
with a long handle wearing oven gloves to protect hands.
●
Add salt and seasoning to the steam bowls when
cooking is finished. This will prevent damage to the
steam generators located in the water reservoir.
●
Fluid collected in the drip tray may be kept and used to
prepare soups and sauces.
●
Do not cook frozen meat, poultry and seafood in the
appliance. These should be thoroughly defrosted before
cooking.
Additional information
●
Proper pressing of a button will be confirmed with
a single beep.
●
During operation, the LCD display remains lit up all the
time.
●
The cooking process may be paused at any time by
pressing
button . To continue the paused
program, press button .
●
You can set cook time by pressing the and
buttons or by holding them down.
●
Program end is indicated by a single beep.
Cleaning and Maintenance
●
Before cleaning, always make sure that the appliance is
switched off and the power cord plug is pulled out from
the mains.
1 Remove the steam bowls and lids.
2
Empty the steam bowls.
3 Carefully remove the drip tray and pour the contents into
a bowl or sink.
4
If there is still some water in the water reservoir, pour it
into a bowl or sink, as shown on the picture.
5 Wipe the water reservoir with a damp cloth.
Clean the appliance only when it is completely
cold.
Do not immerse the heating unit with water
reservoir, power cord and plug in water or any
other liquid.
I