Zelmer 5000, Instructions For Use Manual

Page: 70 / 72

HOW TO EXCHANGE THE OUTLET FILTER: HEPA H11 OR HEPA H13 OR WASHABLE
HEPA
−
raise up the vacuum cleaner handle,
−
seize the filter cover by two protruding catches and strongly press the cover ( 1 ) using two thumbs
then raise it upwards, draw the filter cover out of the vacuum cleaner ( 2 ),
−
take out the class E filter and put a new one in place of the used
one, the HEPA FILTER guarantees its effective use through about
a year,
−
replace the filter cover so that two
protrusions on the lower part of the
cover come into the holes in the
vacuum cleaner body, press the filter
cover home so that its rear catches
snap into the body.
1
1
2
AFTER THE JOB IS FINISHED
−
Take out the cord plug from the network socket.
−
Wind the cord by pressing the button . While doing so hold the cord so that it does not get
tangled and the plug does not slam against the body of the vacuum cleaner.
−
Disconnect the suction end from the tube.
The vacuum cleaner can be stored upright or in a horizontal position. The hose can remain
fixed to the vacuum cleaner but while stored it can not be bent too much
.
THE CLEANING AND MAINTENANCE OF THE VACUUM CLEANER
Before you start cleaning and maintaining the vacuum cleaner make sure the plug is pulled out of the
socket.
Wipe the body and bag chamber with a humid rag (it can be moistened with dish washing agents) dry
them or wipe them dry.
Do not use scrubbing agents and solvents.
Vacuum the suction-brush, small brush and possibly special accessories by means of the crevice
nozzle, from to time.
What to do in case of….
If you can hear a characteristic “fluttering” which would suggest the safety-valve has tripped
(of course if the vacuum cleaner is equipped with a safety-valve):
−
check the bag and accessories, remove the clogging cause and exchange the bag.
The nozzle can be moved only by using some force:
−
decrease the suction power, the cleaning performance will not get worse.
The bag is damaged:
−
exchange the bag and the filters.
The electricity fuse has tripped:
−
check if any other devices are connected to the same electric circuit,
−
if the fuse does trip repeatedly, take the vacuum cleaner to a service shop.
The vacuum cleaner will not work, the body is damaged or the cord is damaged
−
take your vacuum cleaner to a service point.
The vacuum cleaner vacuums poorly:
−
exchange the bag and filter,
70
−
check the suction tubes, hose and nozzle – remove the cause of clogging.
ECOLOGY
At the end of the product’s useful life, please dispose of it at appropriate collection points
provided in your country.