Zelmer 490.30NP, User Manual

Page: 42 / 46

46
490-004_v01
Operational guidelines
To detach the plastic shaft, just follow the attaching
●
procedure in reverse order.
The working time of the blender with plastic shaft can not
●
exceed 3 minutes. Before reusing, the drive shaft must
cool.
Wash the plastic shaft by swishing it in clean, warm
●
water.
When finished, turn the appliance off and unplug it by
●
disconnecting the cable cord from the power outlet.
The appliance operates only with the “power”
or “turbo” button pressed.
Included in the set you will find a special beaker with a
handle for mixing, which is easy and helpful to operate with.
Other jars may be used as well.
USING WHISK ATTACHMENT (Fig. G)
ZELMER hand blender with the whisk attachment purees
soups, whips up your favourite smoothies, mayonnaise or
creams and toppings for waffles and desserts, as well as
rubs egg yoke with sugar or prepares dough for pancakes.
Before assembling on and removing the whisk,
make sure, that the plug of the supplying cord
is disconnected from the socket.
1 Before operation insert the whisk into the gearbox.
2
Such assembled attachment attach to the drive shaft,
align them in the position according to the indicators on the
cover of the drive shaft and the whisk attachment. Then
twist the drive shaft clockwise (the direction is shown by the
arrow) until you hear that it has clicked (the indicator on the
coupling should be in a closed position).
3 Plug the power cord to the power supply socket.
4
Plunge the end of the whisk inside the beaker into
products.
5 Then start – up the appliance pressing the switch
and set the required gear as necessary.
Operational guidelines
To detach the whisk attachment, just follow the attaching
●
procedure in reverse order.
For best results operate the appliance at high gear –
●
12th speed setting.
The working time of the blender with whisk attachment
●
can not exceed 3 minutes. Before reusing, the drive shaft
must cool.
When finished, turn the appliance off and unplug it by
●
disconnecting the cable cord from the power outlet.
You can also use the mixing container included with the
●
blender.
To obtain better results lean the whisk is
a small angle and make round movements with
it inside the bowl.
The level of products placed in a bowl should
not exceed the height of the workspace of the
beater (L).
OPERATING THE MINI FOOD PROCESSOR (Fig. D)
ZELMER hand blender is equipped with a mini food
processor used to chop meat, cheese, nuts, onions, garlic,
carrots, and prunes.
Before assembling on and removing the
blender drive out of the mini food processor,
make sure that the plug of the supplying cord
is disconnected from the mains supply outlet.
Wash the parts in contact with processed product before
first usage.
Operate the blender so, that the closed/open marking
located on the appliance are well visible.
Before each usage of the mini food processor knife,
●
remove the cover out of the blades.
1 Insert the blade into the container so that the protrusion
of the container fits the opening in the blade.
2 Put the food to be processed into the container. Fill in the
container. Do not exceed the marked MAX level.
3 Put the cover-transmission on the container. Make sure
the protrusions fit the openings in the container and turn the
lid clockwise until stop.
4 Place the blender motor in open position on such
assembled mini food processor, in accordance with the
indicator on the motor casing and the lid of the mini food
processor including gearbox.
5 Turn the motor clockwise relative to the transmission
(according to the direction of the arrow) until you hear a click
(the indicator on the transmission should be in the closed
position ).
6 Plug in the appliance.
7 Switch on the appliance pressing the switch .
8
Set the required gear as necessary.
The mini food processor blades are very
sharp. Be very careful during assembling,
disassembling or during cleaning. Store the
knife inside the cover for safety reasons.
It is not allowed to grind too hard products,
such as: coffee beans, nutmeg, ice cubes.
3 cm L